Asphalt Shingle Re Roofing in Auckland

Is your roof looking tired or starting to leak. Upgrade your worn roof with the classic look and reliability of asphalt shingles. Our Auckland re roofing team specialises in asphalt shingle roof replacement, safely removing your old roof and installing a brand new shingle system that looks outstanding and performs for decades. If your current roof is concrete tile, corrugated iron or an older shingle roof, we can replace it with high quality asphalt shingles that are designed for New Zealand conditions. From the first inspection right through to the final clean up, we handle every step so you can enjoy a fresh new look and long lasting weather protection.

If you see water stains on ceilings, bubbling paint or damp patches after rain, there is a good chance your existing roof or underlay has failed. More than one leak is a strong sign that the roof is at or near the end of its life.

Cracked tiles, missing ridge caps, rusted metal sheets or bald patches on old shingles all point to advanced deterioration. Granules from shingles in your gutters, or flaking metal coatings, are another warning that the roof surface is breaking down.

If you call a roofer every time a storm passes through, it might be time to stop patching and consider a full replacement. Repeated local repairs add up, and at a certain point it is more cost effective to invest in a new asphalt shingle roof that you can trust.

Most roof coverings have a realistic service life. Concrete tile, metal and older shingles will eventually become brittle and thin. Even if you do not have leaks yet, an older roof can fail suddenly in a heavy downpour or strong wind. Proactive re roofing avoids that surprise and protects the structure of your home.

Sometimes there is no major damage, but the roof simply looks old. Faded tiles, patched metal and mismatched repairs drag down the appearance of your home. Re roofing with attractive asphalt shingles instantly updates the style and gives you a more refined, high value look.

We offer free roof inspections across Auckland and will always give honest advice. If a repair is all you need, we will tell you. If a roof replacement is the smarter option, we explain why and provide a clear quote.

We begin with a thorough inspection of your existing roof. Our roofing specialists:

• Check the condition of tiles, metal or older shingles
  
• Inspect the underlay and visible timber framing
  
• Confirm roof pitch to ensure it suits asphalt shingles
  
• Identify any structural repairs that may be needed
  

We then discuss shingle styles and colours, and advise on any building consent requirements. For example, changing from heavy concrete tiles to lighter shingles can require consent in Auckland. Where consent is needed, we can assist with the paperwork and drawings.

You receive a detailed, no obligation quote which sets out scope, materials and timing so there are no surprises.

Once you approve the quote, we schedule work at a time that suits you. Our crew carefully removes the existing roof in sections, whether it is:

• Concrete tiles
  
• Corrugated or tray metal
  
• Old asphalt shingles
  

We protect your home and garden with tarps and boards, and we never leave large sections exposed overnight. Where necessary we use temporary coverings so the house remains weather tight at all times.

All old materials are taken off site for disposal or recycling. Metal roofing is recycled and suitable materials are separated so that as little as possible ends up in landfill.

With the old roof removed, we can see exactly what is happening beneath. We:

• Check rafters and trusses for rot or damage
  
• Replace any compromised timber
  
• Confirm fixings and bracing are sound

Asphalt shingles must be installed on a continuous, solid deck. Many older tile roofs have only battens. In those cases, we install treated structural plywood over the rafters to create a strong, even base.

This new deck is fixed to current New Zealand standards, ready to receive the underlay and shingles. We can also discuss upgrades such as extra insulation, ventilation or bathroom extract terminations at this stage.

Before any shingles go on, we lay a high quality roofing underlay across the entire deck. This layer acts as a secondary moisture barrier and is particularly important in Auckland’s wind driven rain.

We overlap and secure the underlay to form a continuous sheet, and flash edges, valleys and penetrations. The underlay adds an extra line of defence, so even in extreme conditions your roof has backup protection beneath the shingles.

Now the transformation really begins. Our licensed roofers install your chosen asphalt shingles in staggered, overlapping rows from the eaves up to the ridge.

We:

• Use corrosion resistant nails suitable for coastal conditions
• Follow manufacturer fixing patterns for maximum wind resistance
• Align each course carefully for a straight, uniform appearance
• Install matching ridge and hip shingles for a tidy finish

The shingles we install are premium quality (we typically use GAF asphalt shingles, a leading brand known for durability). These shingles interlock and seal together in the sun, forming a tough, layered surface that sheds rain and resists high winds. In fact, modern asphalt shingles can handle winds of 160+ km/h (with some premium shingles rated up to 200 km/h when installed to spec), perfect for Auckland’s occasional wild storms. We also ensure proper flashing and sealing around all roof penetrations at this stage, using techniques that meet the NZ Building Code.

With the main shingle field complete, we fit:

• New edge flashings
  
• Valley and apron flashings
  
• Ridge cappings and trims
  
• Any required gutter flashings

These details are critical for long term performance. Good flashing design keeps water moving where it should go and protects joints and changes in direction. We also check gutter conditions and can replace or upgrade gutters if requested.

Once all detailing is done, we clean the roof surface, check fastenings and make sure the finish is consistent across every elevation.

Before we consider the job complete, our supervisor carries out a full quality inspection. We check:

• Shingle alignment and seating
  
• Flashing fit and seal
  
• Valleys and ridges
  
• Roof edges and penetrations.

If council consent was required, we arrange any final inspections needed for sign off.